Solved Pc powers on, no display no beeps

[Jeff Law]

Hi, I have a pc I built myself that i built myself. Was running fine but one day it started boot looping. I found out the motherboard was to blame. I got a new one, now my pc powers on but does not boot or beep
Specs:
Msi X99s SLI plus
I7-6800k
8gb×2 Gskill aegis 3000mhz
Zotac Gtx 1060

 

[Jeff Law]

I already tried resetting ram, change power supply, checked cpu pins, removing gpu, removing setup from case

 

[Bruce]

PC working - replaced dead mobo - PC not working.
on that logic, the mobo would be the first thing to check.

what was the make/model of the old one?
is the new one compatible with your CPU and RAM?
have you tried start the PC without the graphics card and using the mobo vid ports?
what about removing the RAM and starting the PC to really make sure it should beep?
does the mobo have an internal speaker connected so it can beep?

 

[Jeff Law]

The old one is a asrock extreme4
There is no integrated graphics.

 

[Jeff Law]

When I start without ram, the pc will boot loop
I connected a external speaker thru the speaker pins

 

[Bruce]

have you got a model number for that ASRock?
and the external speaker, you plugged that into the green audio 3.5mm jack or onto the pos and neg of the speaker pins on the front panel header on the mobo?

 

[Jeff Law]

I plugged into the the speaker pins on the motherboard.

 

[Jeff Law]

It just says extreme4

 

[Jeff Law]

Actually, its bootlooping -> change mobo -> starts but no post

 

[Bruce]

Changing the mobo may have been too big a hardware change for Windows and a repair install could be required.

 

[Jeff Law]

Changing the mobo may have been too big a hardware change for Windows and a repair install could be required.

How do I do that?

 

[Jeff Law]

The new motherboard only required a bios update and I did it by paying someone as I didn't have the cpu.

 

[Bruce]

so it's all sorted now?

 

[phillpower2]

Thread closed due to lack of feedback from the OP.