Solved PC bsod nonstop as soon as windows loads in

[Maurice]

I was watching YouTube and then out of a sudden I got a bsod, I started the pc and and then it went downhill
Whenever the windows spinning thing appears the pc gets bsod and each time a different error:
PAGE_FAULT_IN_NONPAGED_AREA

SYSTEM THREAD EXPECTATION NOT HANDELED

DRICER_IRQL_NOT_LESS_OR_EQUAL

 

[phillpower2]

Post a new Speccy url and upload any crash dmps which you need to do by only using the following steps;

1. Copy any dmp files from C:\Windows\Minidump onto the desktop.
2. Select all of them, right-click on one, and click on Send To> New Compressed (zipped) Folder.
3. Upload the zip folder using the Attach button, bottom left of the dialogue input box

 

[Maurice]

That's my Speccy
I JUST caught it before the bsod, when it boots again I'ma do my best to get the dmp files

 

[phillpower2]

Speccy is not flagging anything up which is normally a good sign as it suggests that your hardware is ok,

One thing missing from Speccy is the RAM voltage so if the computer happens to restart at all can you go into the BIOS and see what voltage is reported for the DRAM.

We need to wait on any dmps and the RAM voltage info for now.

 

[Maurice]

Aight so, I can't figure out how to find the ram voltage in bios
And for the dmps, I can't get those either since trying to boot into my SSD sends me directly to the bios

 

[phillpower2]

Go into the AI Tweaker area of the BIOS then scroll down until you see DRAM voltage, is there an Auto tab to the right of it.

So you haven't been able to boot into Windows at all since you post your reply #3 yesterday.

 

[Maurice]

Yup there is an Auto tab to the right of the DRAM Voltage and on top right it says standard =1.500V
And about my windows, I had to reinstall Windows to get it to boot up again

 

[phillpower2]

1.5V is the correct voltage for the RAM and if you have reinstalled Windows any crash dmps have gone.

 

[Maurice]

I'm aware the dmps are gone, I couldn't access my previous windows install anymore unfortunately :/

 

[phillpower2]

Aight so, I can't figure out how to find the ram voltage in bios
And for the dmps, I can't get those either since trying to boot into my SSD sends me directly to the bios

Was just acknowledging what you had post in your reply #5., if you would rather that I just ignored the info you may want to not type in bold next time

 

[Maurice]

I didn't bold it on purpose, it did that on its own

 

[phillpower2]

Strange

Without any crash dmps we have nothing to do atm.

 

[Maurice]

Yup, guess that's it for now
I appreciate your help, thanks a lot!

 

[phillpower2]

Can I just double check that since you reinstalled Windows you then did the following;

1: Installed the chipset drivers for the MB.

2: Installed the SATA drivers for the storage devices.

3: Installed the appropriate drivers for your video card.

You are welcome

 

[Maurice]

Oh yeah right!!
This time I had no issues installing the chipset drivers! And the rest went smoothly as normal!

 

[phillpower2]

Glad to hear it and lets hope that you will not have any more issues.

Tip, before installing any new software/programs etc, make sure that you create a new system restore first and as long as everything is running smoothly do not update any drivers.

 

[Maurice]

Thank you! I'll create a restore point tonight after work
Dunno why I never thought of doing so before lol but thanks for the tip!

 

[phillpower2]

You are welcome

 

[phillpower2]

Not heard back from you Maurice , do you still require assistance or is the issue now resolved, an update would be appreciated.

Edit to add: We will take the lack of a response as the issue being solved and mark the thread accordingly.