Hello fello pchf members
Need some help here lads and lasses..
I have a dell e6410 with a samsung ssd 1tb hard drive. All is working perfectly at the moment.
The machine has 7 partitions I created them using ease us.
However I would like to back up the drive completely so I have a fully usable drive should anything go sour with my ssd
So I have a 1tb internal hhd here I would like to use hoping I can although it's not a sdd?
I have a cable to connect it to the machine via USB.
I have ease us partition master 11.0 installed and have as previously mentioned in the past I used it to make my partion's.
All well thus far.
Last weekend I made a full backup of my ssd (cloned it) using said hdd and said software
All reported as went well. Took approx 9 hours to complete.
Disk boot up fine to the master main operating system all shortcuts appear find and operate perfectly.
However if I go to any of the other partions I get the preparing your desktop message for a while. Then a load of pop up box's reporting this and that dll missing. Eventually a msg saying I can use a virtual desktop.
Then I will see my softwares on my desktop I would like to access but there icons are incomplete and the shortcuts fail to work....
My question is... why is it falling to clone 1 on 1 and is this because I'm going from ssd to hdd?
And of course how can I fix this???
If need be I will buy another ssd. But I would prefer not to as we all know how expensive they are!
But I do need this ssd backed up cloned fully working in event of a disaster
I look forward to hearing advice form the expert window guys
Thank you all Norman1967
Need some help here lads and lasses..
I have a dell e6410 with a samsung ssd 1tb hard drive. All is working perfectly at the moment.
The machine has 7 partitions I created them using ease us.
However I would like to back up the drive completely so I have a fully usable drive should anything go sour with my ssd
So I have a 1tb internal hhd here I would like to use hoping I can although it's not a sdd?
I have a cable to connect it to the machine via USB.
I have ease us partition master 11.0 installed and have as previously mentioned in the past I used it to make my partion's.
All well thus far.
Last weekend I made a full backup of my ssd (cloned it) using said hdd and said software
All reported as went well. Took approx 9 hours to complete.
Disk boot up fine to the master main operating system all shortcuts appear find and operate perfectly.
However if I go to any of the other partions I get the preparing your desktop message for a while. Then a load of pop up box's reporting this and that dll missing. Eventually a msg saying I can use a virtual desktop.
Then I will see my softwares on my desktop I would like to access but there icons are incomplete and the shortcuts fail to work....
My question is... why is it falling to clone 1 on 1 and is this because I'm going from ssd to hdd?
And of course how can I fix this???
If need be I will buy another ssd. But I would prefer not to as we all know how expensive they are!
But I do need this ssd backed up cloned fully working in event of a disaster
I look forward to hearing advice form the expert window guys
Thank you all Norman1967
