Dell laptop powered off during reset won't work
- Thread starter Donehelp
- Start date
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More. -
Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
- Status
When you power on the system tap the F8 key see if we can get back to the Advanced Startup Options Screen.
May have to try this a few times.
The screen that you are showing is not for Windows 7.
Have you made any changes to the BIOS settings?
May have to try this a few times.
The screen that you are showing is not for Windows 7.
Have you made any changes to the BIOS settings?
Do you have the install media?
If not you can get it and create a USB from here. Suggest using a 16-32 GB thumb drive.
Once created and you have booted from the USB storage device
Method one:
On the Windows Setup Screen
Press the Shift + F10 keys on your keyboard to open Command Prompt.
Method two:
www.tomshardware.com
Once in the command prompt run a Check Disk using the /r and let us know if it reports back any thing wrong.
If the drive comes back with nothing wrong.
Try the install media to install Windows 10 again
When you get to the screen asking Where do you Want to Install
Select each One and click Delete
Then continue with the install.
If not you can get it and create a USB from here. Suggest using a 16-32 GB thumb drive.
Once created and you have booted from the USB storage device
Method one:
On the Windows Setup Screen
Press the Shift + F10 keys on your keyboard to open Command Prompt.
Method two:
How To Start Windows 10 In Command Prompt
If Windows 10 can’t boot at all, the command line interface (CLI) is the only option you have. Booting Windows 10 in Command Prompt requires that you have Windows 10 on a bootable disc or USB drive. Here’s how.
Once in the command prompt run a Check Disk using the /r and let us know if it reports back any thing wrong.
If the drive comes back with nothing wrong.
Try the install media to install Windows 10 again
When you get to the screen asking Where do you Want to Install
Select each One and click Delete
Then continue with the install.
F8 has not worked since Windows 8 and the advent of UEFI and fast boot, you need to try and get into the Windows recovery environment (RE), see my canned info below;
See if you are able to force the computer to start in the Windows Recovery Environment (RE) by starting up and shutting down the computer two or three times using the case power button, please note that you need to shut down the computer after the MBs (Dell) splash screen and just before Windows attempts to load, if successful you should then continue to the Troubleshooting options and then hopefully be able to use Reset this PC, a system restore point or Safe Mode etc.
- Status