Audio Question

  • Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Status
Not open for further replies.
Skindred

Skindred

PCHF Member
Jan 1, 2017
22
1
35
Hello
I have been using the same equipment for awhile now, but when I moved the audio now generates static and also ever 5 sec or so pops.
I have been browsing around the forums trying various suggestions. I decided to make a post of my own to see if maybe I am missing something.
My build
I have a Mixer (Behringer XENYX X1222 USB), the USB connects to my computer. (I have tired moving it to different ports on the pc from front to back) Connected to the mixer is a headset and mic(mic is AKG P220)(headset is sennheiser)

I know its the PC, because when I shutdown the PC the popping stops, also when I start up something that uses audio the popping stops(example; teamspeak, youtube, anything that generates audio)

I also was using a program called OBS (Open Broadcasting Software) and the people that I was broadcasting to heard static, all the time.

I have my computer plugged into a APC, so when the power goes out I have time to shutdown my PC. I was using this and did not have a problem before.

If you need to know anything else about the build of my computer please let me know
Thank You
Raz
 
Skindred said:
but when I moved the audio now generates static and also ever 5 sec or so pops.
Click to expand...



To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Skindred said:
but when I moved
Click to expand...
You move your head, relocated the audio card, moved the system to another spot?

We had this happening at one of our work stations come to find out we were getting interference form some newly installed led lighting. Once they were turned off the interference went away.

Try different outlets, with out the APC, Nothing but the system on, everything disconnected for the USB ports.

Like Mal has stated re-seat and try again some thing may have come loose if the system has been moved.
 
Planning on getting some compressed air in a can, and doing this tomorrow. If it still happening I will try a different outlet.

Would a surge protector stop electrical noise?
 
Last edited:
Skindred said:
Planning on getting some compressed air in a can, and doing this tomorrow. If it still happening I will try a different outlet.
Click to expand...
Keep us informed and contact if you need any
assistance.
Skindred said:
Would a surge protector stop electrical noise?
Click to expand...
Can not say it did not in our case with the LED lights. The APC should have a surge/spike protector and suppressor.
 
I have been messing around with what I have plugged into the computer and found something interesting, to which leads me to believe that the static sound is not coming from the computer.
I turned off my mixer (Behringer XENYX X1222 USB) and the static was still there, I then unplugged my Mic and Headset from the mixer, and the static was still there. I then unplugged the USB cable going from the mixer to the computer and the static was gone. I plugged everything back in and with the mixer on disconnected the USB cable and the static was gone. I do not believe that the static is coming from the PC, however the popping noise is coming from the PC.
I did some research and found a neat little device.
717jhFa4ZtL._SL1500_.jpg

  • Dual-function USB and data filter
  • Reduces the noise and ringing afflicting both the data and power lines on USB ports
  • Insert into the USB input of any computer, laptop, DAC, receiver, streamer, car, or smartphone significantly minimizes jitter and packet errors
  • A second JitterBug can also be used in parallel with the first
  • Solves Sound-Degrading Problems Inherent to Every Computer-Audio Setup
I was wondering what you all thought about it. Has good ratings on amazon, and many reviews that are positive as well. I was not sure if I could post a link to the page on amazon, so I just uploaded the image and put in what they list it does.

Thank You
Razgriz
 
  • Like
Reactions: veeg
I purchased the device I mentioned in the above post, I am going to be checking the internals of my pc today as well.
 
UPDATES, I clean out my pc and resat my ram and graphics card. Freaked out cause 1st boot and it froze, restarted 2 times same thing. Took out a ram card that I think was causing the issue and it booted, but froze, however I let it sit and the pic recovered. Now my web browser is not responding. I do not hear the popping sound anymore, but to soon to tell.

Need help with freezing problem, please help.

Thank You

Raz


Sent from my iPhone using Tapatalk
 
Update: found out that one of my ram sticks is bad. Could be causing the freezing, going to pull out the one I think it is, and boot back up.


Sent from my iPhone using Tapatalk
 
Okay ran the memtest, though did not let it run more than 1 pass. I have homework to do tonight for my CCENT class. I will run more than 1 scan tomorrow, while I work on my other homework that does not require a pc.
 
I am still having intermittent freezing issues. Which I've never had before kinda wishing I never cleaned out the pc of dust. This really sucks


Sent from my iPhone using Tapatalk
 
Update ran test for a couple of hours. Are there any logs I need to post


Sent from my iPhone using Tapatalk
 
ran test for a couple of hours.
Click to expand...
You need to run the memory test for at least 8 passes. Time means nothing, it is the number of passes that is important.
If you see any errors, you can stop the test because you know there is a problem with a memory stick. You'd then need to test the sticks one by one to figure out which stick (or perhaps more than one) has a problem.
 
  • Like
Reactions: veeg
I ran it for 5 passes
I will run it again and go for 8 passes
 
Last edited:
One other thing about the RAM sticks make sure you are putting them in the correct slots. Made sure nothing is loose and all the fans are working?

Did you remove any of the heat sinks?
 
Rustys said:
One other thing about the RAM sticks make sure you are putting them in the correct slots. Made sure nothing is loose and all the fans are working?

Did you remove any of the heat sinks?
Click to expand...


No I have not removed any of the heat sinks. I've been making sure that everything is plugged in correctly.
 
Status
Not open for further replies.
Top Bottom