I’ve replaced my gt 1030 with a 1660 ti with ease, however this problem started when I was looping in the bios settings. After pressing something I probably shouldn’t of my screen is now just black. If I press a shift out appears s white lower score bar. I’m quite a noob so I got no idea on what to do now.
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
- Status
if you think this was due to tinkering in the BIOS, let's start by setting that back to its defaults.
remove the CMOS battery from the motherboard, remove the power cable from the case and turn the PC on.
Yes, it won't start but that process will drain any residual charge left in the capacitors.
now put the CMOS battery back, and reconnect the power cable and boot the PC up.
get back into the BIOS and check the settings are all back to default - the date and time will be the best indicator.
or in this case, just getting a signal to the screen would be a good outcome.
if no luck, try putting back the old GPU.
another option, check if your motherboard as a pin header that resets CMOS, often labelled on the motherboard as CLR CMOS - but check the mobo manual.
remove the CMOS battery from the motherboard, remove the power cable from the case and turn the PC on.
Yes, it won't start but that process will drain any residual charge left in the capacitors.
now put the CMOS battery back, and reconnect the power cable and boot the PC up.
get back into the BIOS and check the settings are all back to default - the date and time will be the best indicator.
or in this case, just getting a signal to the screen would be a good outcome.
if no luck, try putting back the old GPU.
another option, check if your motherboard as a pin header that resets CMOS, often labelled on the motherboard as CLR CMOS - but check the mobo manual.
1. Make and model of the PSU?
2. Did you remove the old drives and software before installing the new to prevent conflicts?
2. Did you remove the old drives and software before installing the new to prevent conflicts?
Cannot find any information on that brand of power supply. See if the following image help to find the proper information we need.
- Status