Hi everybody, i'm new to the forum. As title says, i got a problem with an old school configuration. I got an ASUS P5KPL-AM EPU motherboard, temporarily equipped with a 512mb pc2-4200u RAM chip. Today i got the q6600 CPU that i had ordered, and i noticed from the start some strange things. CPU looks like it's been dropped because it has a mark on the corner, and the IHS got some strange marks on the top, like dried thermal paste, but it didn't go away even using alcohol. I removed the old Pentium 4 that i used temporarily while waiting for the q6600, and i put the new cpu in the socket. After plugging all the things up, i powered up the pc, but i didn't obtain any image on the monitor. So i plugged a mobo speaker, and it gave me 1 long beep, and 2 short beeps followed by a pause, then repeated. From the ASUS website, looks like it's a memory problem, so i reseated the ram like 5 times but without luck. With the Pentium 4, it works fine. So, is it a CPU or a RAM problem?
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
New CPU problem.
- Thread starter cunsucu
- Start date
- Status
Hi, it is a LGA 775 cpu, so it doesn't have any pins on the CPU. The motherboard socket is fine ..
Do you have another 775 CPU to rule out a bad CPU? You said you had a temp P4. Do you still have it?
I tested the motherboard with a Pentium 4 519K, and a Celeron D 326.. they both work without issues. I never had a faulty CPU, but this may be the first time.. Anyways is very difficult to break a CPU (of course if you don't OC it). Maybe the previous owner OCed it doing something wrong? Anyways i think that it is a physical damage issue, as i wrote on the first post..
A little update:
So i let the seller of the q6600 know the problems i encountered, and he said to me that the cause was Windows, impossible thing because the only bootable drive was a memtest86 pendrive.. also he suggested me to update the BIOS to the last version, but my MB already has it..
He also asked me some photos of the CPU, which of course i sent to him.
This is one of the photos that i sent to him. You can clearly notice the bent corner.. Should i ask for a replacement?
I know is an old CPU, but i need it for the type of pc that i'm building..
So i let the seller of the q6600 know the problems i encountered, and he said to me that the cause was Windows, impossible thing because the only bootable drive was a memtest86 pendrive.. also he suggested me to update the BIOS to the last version, but my MB already has it..
He also asked me some photos of the CPU, which of course i sent to him.
This is one of the photos that i sent to him. You can clearly notice the bent corner.. Should i ask for a replacement?
I know is an old CPU, but i need it for the type of pc that i'm building..
It appears that this issue is resolved, therefore I am closing the topic. If that is not the case and you need or wish to continue with this topic, please send me or any staff member a Personal Message (PM) that you would like this topic re-opened. 
- Status