Hey guys, I really need help. I'm installing a MSI Coreliquid 240R on an ASRock B550 Phantom Gaming 4/ac (AMD4), and I cannot seem to figure out the wiring. I was only able to get 1 fan to spin, but none of the lights.
Here is an album that contains all the photos of the components' wires. It also includes my mobo diagram with descriptions.
The included instructions do not help AT ALL, so I thought I would come here. Has anyone installed one of these on a similar mobo?
My open headers on the motherboard are:
CPU_FAN1
CPU_FAN2/WP
ADDR_LED2
RGB_LED2
I tried daisy chaining the fans with both 3-pin gapped males and females attached, but then I have no idea where the extra cables. I attached the 3-pin female radiator cable to CPU_FAN2/WP, and the Heatsink 3-pin female to ADDR_LED2. Then with the daisy-chained fans, I put one of the female 4-pins into the male 4-pin of the splitter and attached that to CPU_FAN1. The only thing that spun up was Fan 1, and no LED. I also tried connecting the splitter to the adapter to an open connection from the power supply, but that didn't seem to work either.
I'm so confused, any help would be greatly appreciated. If anyone could maybe just spell it out like (Fan1 3pin male->Fan2 3pin female->Splitter->xxxx, Heatsink->xxxx, & Radiator->xxx), I will be eternally grateful
Here is an album that contains all the photos of the components' wires. It also includes my mobo diagram with descriptions.
The included instructions do not help AT ALL, so I thought I would come here. Has anyone installed one of these on a similar mobo?
My open headers on the motherboard are:
CPU_FAN1
CPU_FAN2/WP
ADDR_LED2
RGB_LED2
I tried daisy chaining the fans with both 3-pin gapped males and females attached, but then I have no idea where the extra cables. I attached the 3-pin female radiator cable to CPU_FAN2/WP, and the Heatsink 3-pin female to ADDR_LED2. Then with the daisy-chained fans, I put one of the female 4-pins into the male 4-pin of the splitter and attached that to CPU_FAN1. The only thing that spun up was Fan 1, and no LED. I also tried connecting the splitter to the adapter to an open connection from the power supply, but that didn't seem to work either.
I'm so confused, any help would be greatly appreciated. If anyone could maybe just spell it out like (Fan1 3pin male->Fan2 3pin female->Splitter->xxxx, Heatsink->xxxx, & Radiator->xxx), I will be eternally grateful
