Getting Bsod regularly (no minidumps created)

[xrobwx71]

Try it with the NVApiWrapper unchecked. After you uncheck it, restart the App.

Make sure you have the .NET8 runtime installed.

[HEADING=2].NET Desktop Runtime 8.0.16[/HEADING]

64bit <-----Direct Download

[maxim123]

Try it with the NVApiWrapper unchecked. After you uncheck it, restart the App.

Make sure you have the .NET8 runtime installed.

[HEADING=2].NET Desktop Runtime 8.0.16[/HEADING]

64bit <-----Direct Download

Yes, I installed it.
after unchecking NVApiWrapper, it shows this now:

[maxim123]

Try it with the NVApiWrapper unchecked. After you uncheck it, restart the App.

Make sure you have the .NET8 runtime installed.

[HEADING=2].NET Desktop Runtime 8.0.16[/HEADING]

64bit <-----Direct Download

Yes, I installed it.
after unchecking NVApiWrapper, it shows this now:

[xrobwx71]

Click the kabob (3 vertical dots) at the top right, choose Refresh Sensor detection.

If it still doesn’t work, also uncheck ADLXWrapper and refresh sensor detection.

[xrobwx71]

Click the kabob (3 vertical dots) at the top right, choose Refresh Sensor detection.

If it still doesn’t work, also uncheck ADLXWrapper and refresh sensor detection.

[maxim123]

Click the kabob (3 vertical dots) at the top right, choose Refresh Sensor detection.

If it still doesn’t work, also uncheck ADLXWrapper and refresh sensor detection.

Hi, I did both, and both only said [ATTACH type=“full” size=“459x119”]15465[/ATTACH] and didn’t show anything else.

[maxim123]

Click the kabob (3 vertical dots) at the top right, choose Refresh Sensor detection.

If it still doesn’t work, also uncheck ADLXWrapper and refresh sensor detection.

Hi, I did both, and both only said [ATTACH type=“full” size=“459x119”]15465[/ATTACH] and didn’t show anything else.

[xrobwx71]

So it doesn’t run through the sensor detection?

Recheck both and refresh.

[xrobwx71]

So it doesn’t run through the sensor detection?

Recheck both and refresh.

[maxim123]

So it doesn’t run through the sensor detection?

Recheck both and refresh.

the fans still don’t show up.
I rechecked both, and restarted. It gives the first error: following sensor provider(s) failed Nvapi…

[maxim123]

So it doesn’t run through the sensor detection?

Recheck both and refresh.

the fans still don’t show up.
I rechecked both, and restarted. It gives the first error: following sensor provider(s) failed Nvapi…

[maxim123]

Also, not a BSOD, but it has happened a few times. Windows getting stuck at login screen.
[ATTACH alt=“IMG_20250610_091633.webp”]15466[/ATTACH]

It just gets stuck here and I have to restart it. This is like BSOD. There are still no dumpfiles created.
Got this particular issue again earlier after closing laptop for about 15-20 mins and turning it on.
do i have no choice than to check with a clean reinstall of windows?

[maxim123]

Also, not a BSOD, but it has happened a few times. Windows getting stuck at login screen.
[ATTACH alt=“IMG_20250610_091633.webp”]15466[/ATTACH]

It just gets stuck here and I have to restart it. This is like BSOD. There are still no dumpfiles created.
Got this particular issue again earlier after closing laptop for about 15-20 mins and turning it on.
do i have no choice than to check with a clean reinstall of windows?

[maxim123]

the riot players support said:
[ATTACH type=“full” size=“719x837”]15469[/ATTACH]

From what I researched, chkdsk is supposedly not useful and can even harm the harddisk. Is it okay to follow with their suggestions? I have previously done sfc scannow and DISM commands. I haven’t done chkdsk before.

[maxim123]

the riot players support said:
[ATTACH type=“full” size=“719x837”]15469[/ATTACH]

From what I researched, chkdsk is supposedly not useful and can even harm the harddisk. Is it okay to follow with their suggestions? I have previously done sfc scannow and DISM commands. I haven’t done chkdsk before.