Getting Bsod regularly (no minidumps created)

[maxim123]

Hello, I have been getting BSOD after a long shutdown (like when I turn on the laptop in morning after turning it off at night)
I got kernel data inpage error on may30. the next day, I got critical service failed.
After that, till now, have been getting critical process died bsod every day.

Usually, after getting the bsod once, there is no bsod throughout the day even if I restart. But yesterday, after few hours of getting the first BSOD at the start, I got the same BSOD again. and got another BSOD just 2 hrs ago(after about 8 hrs from the second BSOD). so 3 BSODs today. all critical process died.

I just started laptop earlier and got BSOD as usual. then I restarted and it immediately went to BOOT screen repeatedly. so I just let it stay turned off for a while and started again. It started, but got BSOD again. Waited for a few mins again and started, then it worked.
currently backing up files in case it suddenly goes out on me.

There are no minidumps created as the BSOD is always stuck at 0%. (I had disabled automatic restart so I could take photos of the bsods, since it restarts immediately after showing bsod without creating logfiles)
[ATTACH alt=“IMG_20250602_093113.webp”]15442[/ATTACH] [ATTACH alt=“IMG_20250605_085645.webp”]15443[/ATTACH]
a photo of the bsod and the boot sequence.

I would like to know if this is SSD error or RAM error. I still have 2 months warranty left, so I would like to determine the error and get a hardware replacement if it is hardware issue.

this is my laptop specs: https://speccy.piriform.com/results/...EGIygJpROOlefs

[xrobwx71]

If your PC is not creating dumps, make sure to read the following and make sure to make any changes recommended.

https://learn.microsoft.com/en-us/troubleshoot/windows-client/performance/configure-system-failure-and-recovery-options

[maxim123]

If your PC is not creating dumps, make sure to read the following and make sure to make any changes recommended.

https://learn.microsoft.com/en-us/troubleshoot/windows-client/performance/configure-system-failure-and-recovery-options

After looking at the article, I changed the write debugging to automatic memory dump. Hopefully, it creates a logfile.

[xrobwx71]

If it does, please upload the dump here. If it’s too large to upload, share it via Google Drive, OneDrive, DropBox, etc.

Download MiniToolBox (MTB) by Farbar.

Once open, Tick the following boxes:
Flush DNS
List last 10 Event Viewer Errors
List Installed Programs
List Devices (only problems)
List Users, Partitions and Memory size
List MiniDump Files
List Restore Points
Like this:
[IMG alt="AD_4nXdzis2IAjQnwyj9vmDppmihSh5uglNv7IlPf_nwg wJAJIvzHoxtrN6ZjdebF1SclT8EbuwKCzVxqngKmnTdrMplCrH sjt7NcJnCsFQ4mgiUQNWZA0zRB5b8pupiRg6edgCuxlru" width="466px" height="500px"]https://lh7-rt.googleusercontent.com/docsz/AD_4nXdzis2IAjQnwyj9vmDppmihSh5uglNv7IlPf_nwgwJAJI vzHoxtrN6ZjdebF1SclT8EbuwKCzVxqngKmnTdrMplCrHsjt7N cJnCsFQ4mgiUQNWZA0zRB5b8pupiRg6edgCuxlru?key=cizFx iONIjROkLJXdJkJN1Ri[/IMG]

Click Go. A file MTB.txt will be created in the same folder you ran the program. Upload this in your next post.

[maxim123]

so I got the same BSOD as usual when I started the laptop today. and it seems the time range for the ‘long shutdown’ is quite low. could be just 10 mins of turning the laptop off and I would get BSOD when I turn it on.

there was no minidump created unofrtunately.
Here is the log from MiniToolBox.
No idea why, but I saved the app in desktop, but the MTB was created in \AppData\Roaming\IDM folder.

[xrobwx71]

Do you use any of the Lenovo utilities or software?

Try updating the Blitz.exe from blitz.gg

Look for the minidump in C:\Users\Ripple\AppData\Local\CrashDumps
or C:\Windows\Minidump\
If there are any .dmp files, please upload them in your reply.

[maxim123]

Do you use any of the Lenovo utilities or software?

Try updating the Blitz.exe from blitz.gg

I uninstalled Blitz app a few days ago with geek app. does it still show up?
I don’t use any lenovo apps. I use fantech mouse app, but no lenovo apps as far as I can remember.

[xrobwx71]

Error: (06/03/2025 04:30:21 PM) (Source: Application Error) (EventID: 1000) (User: DESKTOP-HVT1NAR)
Description: Faulting application name: Blitz.exe, version: 2.1.313.7157, time stamp: 0x669ede81
Faulting module name: blitz_core.node, version: 0.0.0.0, time stamp: 0x68246771
Exception code: 0xc0000005
Fault offset: 0x0000000000048123
Faulting process id: 0x0x32c0
Faulting application start time: 0x0x1dbd3ab4addd552
Faulting application path: C:\Users\Ripple\AppData\Local\Programs\Blitz\Blitz .exe
Faulting module path: \?\C:\Users\Ripple\AppData\Roaming\Blitz\blitz-deps\2.1.313\blitz_core.node
Report Id: 595b1e6b-1776-4537-aaf6-6172ca364a47

---

The above is from your MiniToolBox txt. The blitz error is from 6/3/25

You can uninstall using the GeekUninstaller, the Lenovo software, as it’s also causing errors. Specifically- The Lenovo Vantage Suite

Get rid of Internet Download Manager as well.

Upload this file, please. C:\Windows\Minidump\091624-17484-01.dmp

I don’t see any indication of a hardware problem. Just the software mentioned.

[maxim123]

Error: (06/03/2025 04:30:21 PM) (Source: Application Error) (EventID: 1000) (User: DESKTOP-HVT1NAR)
Description: Faulting application name: Blitz.exe, version: 2.1.313.7157, time stamp: 0x669ede81
Faulting module name: blitz_core.node, version: 0.0.0.0, time stamp: 0x68246771
Exception code: 0xc0000005
Fault offset: 0x0000000000048123
Faulting process id: 0x0x32c0
Faulting application start time: 0x0x1dbd3ab4addd552
Faulting application path: C:\Users\Ripple\AppData\Local\Programs\Blitz\Blitz .exe
Faulting module path: \?\C:\Users\Ripple\AppData\Roaming\Blitz\blitz-deps\2.1.313\blitz_core.node
Report Id: 595b1e6b-1776-4537-aaf6-6172ca364a47

---

The above is from your MiniToolBox txt. The blitz error is from 6/3/25

You can uninstall using the GeekUninstaller, the Lenovo software, as it’s also causing errors. Specifically- The Lenovo Vantage Suite

Get rid of Internet Download Manager as well.

Upload this file, please. C:\Windows\Minidump\091624-17484-01.dmp

I don’t see any indication of a hardware problem. Just the software mentioned.

[ATTACH type=“full” size=“474x425”]15452[/ATTACH]

I don’t see lenovo here. even when I search for it in pc, nothing shows up. Blitz was uninstalled through geek uninstaller few days ago, even the blitz folder in appdata folder was deleted.

[maxim123]

Error: (06/03/2025 04:30:21 PM) (Source: Application Error) (EventID: 1000) (User: DESKTOP-HVT1NAR)
Description: Faulting application name: Blitz.exe, version: 2.1.313.7157, time stamp: 0x669ede81
Faulting module name: blitz_core.node, version: 0.0.0.0, time stamp: 0x68246771
Exception code: 0xc0000005
Fault offset: 0x0000000000048123
Faulting process id: 0x0x32c0
Faulting application start time: 0x0x1dbd3ab4addd552
Faulting application path: C:\Users\Ripple\AppData\Local\Programs\Blitz\Blitz .exe
Faulting module path: \?\C:\Users\Ripple\AppData\Roaming\Blitz\blitz-deps\2.1.313\blitz_core.node
Report Id: 595b1e6b-1776-4537-aaf6-6172ca364a47

---

The above is from your MiniToolBox txt. The blitz error is from 6/3/25

You can uninstall using the GeekUninstaller, the Lenovo software, as it’s also causing errors. Specifically- The Lenovo Vantage Suite

Get rid of Internet Download Manager as well.

Upload this file, please. C:\Windows\Minidump\091624-17484-01.dmp

I don’t see any indication of a hardware problem. Just the software mentioned.

[ATTACH type=“full” size=“474x425”]15452[/ATTACH]

I don’t see lenovo here. even when I search for it in pc, nothing shows up. Blitz was uninstalled through geek uninstaller few days ago, even the blitz folder in appdata folder was deleted.

[maxim123]

sorry, I just realized that the old minidump wasn’t able to be attached. It shows attached, but when posted, the attached file doesn’t show up. It is 5.52 mb.

I have uploaded it currently in sendspace if that’s okay, or I can upload in a file uploader of your choice: https://www.sendspace.com/file/3q0xdh

[maxim123]

sorry, I just realized that the old minidump wasn’t able to be attached. It shows attached, but when posted, the attached file doesn’t show up. It is 5.52 mb.

I have uploaded it currently in sendspace if that’s okay, or I can upload in a file uploader of your choice: https://www.sendspace.com/file/3q0xdh

[xrobwx71]

Uninstal the Control Center Service.

[xrobwx71]

Uninstal the Control Center Service.

[maxim123]

Uninstal the Control Center Service.

It is a default app installed by the assembly company. I use it to mainly control fan speeds based on the works I am doing. like if I am using multiple apps, then I use turbo mode, otherwise game mode if I am only using 2 or 3 apps.