Tweet
Building a DIY custom PC can be arduous, even for seasoned PC builders like myself. But iCUE Link, a new product line from component manufacturer Corsair, could make the whole process a lot more streamlined.
I remember spending hours on my very first PC build years ago, struggling to fit everything together inside my case - and the worst part of it all, something that still plagues me even now, was cable management. Good cable management is something of a holy grail among PC builders, with all too many of us settling for an opaque side panel that conceals our cable clutter.
iCUE Link, which Corsair described at Computex 2023 as a âsmart component ecosystemâ, uses patent-pending single-cable connections to link (see what they did there?) all your components together. For example, an LED fan wonât need both a power cable and an RGB control cable routed through the case; itâll just have a single cable.
[HEADING=1]Cleaning up your case[/HEADING]
[IMG alt=âMultiple PC components connected together via the Corsair iCUE Link system.â]https://cdn.mos.cms.futurecdn.net/Ru...jroPNL2cTR.png
Daisy-chaining components is great, but even better is how the iCUE Link fans can connect to each other simply by slotting together on a radiator or fan mount. (Image credit: Corsair)
The real draw here isnât just that each component only needs a single cable, though, itâs that you can âdaisy-chainâ any compatible parts together, with only one âendâ cable connecting to the Corsair control hub.
Fans mounted side-by-side on the same radiator can be linked together directly without any cables at all. The image above illustrates how this will work. Previously, every single fan would need a separate connection to the hub in the bottom left.
The picture below shows what your case could look like with iCUE Link at work - sure, it probably wonât be quite as neat and tidy as this, but even my own current gaming PC (which is somewhere in the triple digits of âcomputers Iâve builtâ) doesnât look this good behind the side panel.
[IMG alt=âThe backplate of a PC showing neat cable management with the Corsair iCUE Link hub.â]https://cdn.mos.cms.futurecdn.net/zQ...XcwuWpemFR.png
Look at how clean that cable management is. This is bordering on pornographic for PC-builders like me. (Image credit: Corsair)
Building your own PC is still a serious undertaking - and if you prefer the easy life, all the best computers are âno assembly requiredâ - but Corsair claims that using Link products can speed up the overall process by as much as 50%. Iâm not entirely sure where that figure comes from, but I can attest that cable management can be a time-consuming aspect of putting together a high-performance PC. The only downside, of course, is that youâll need to stick with compatible Corsair components to get the best experience - and while Corsairâs products are typically very high quality, there are cheaper options out there.
Corsair offers the full details in a blog post, confirming that the first wave of Link-compatible products will be landing very soon in June, with more products coming later in 2023. Personally, I think this is a great step forward in simplifying the PC-building process; I just wish Corsair made more stuff, so this wouldnât be limited to just cooling components. Corsair graphics cards, please?
Continue readingâŚ
I remember spending hours on my very first PC build years ago, struggling to fit everything together inside my case - and the worst part of it all, something that still plagues me even now, was cable management. Good cable management is something of a holy grail among PC builders, with all too many of us settling for an opaque side panel that conceals our cable clutter.
iCUE Link, which Corsair described at Computex 2023 as a âsmart component ecosystemâ, uses patent-pending single-cable connections to link (see what they did there?) all your components together. For example, an LED fan wonât need both a power cable and an RGB control cable routed through the case; itâll just have a single cable.
[HEADING=1]Cleaning up your case[/HEADING]
[IMG alt=âMultiple PC components connected together via the Corsair iCUE Link system.â]https://cdn.mos.cms.futurecdn.net/Ru...jroPNL2cTR.png
Daisy-chaining components is great, but even better is how the iCUE Link fans can connect to each other simply by slotting together on a radiator or fan mount. (Image credit: Corsair)
The real draw here isnât just that each component only needs a single cable, though, itâs that you can âdaisy-chainâ any compatible parts together, with only one âendâ cable connecting to the Corsair control hub.
Fans mounted side-by-side on the same radiator can be linked together directly without any cables at all. The image above illustrates how this will work. Previously, every single fan would need a separate connection to the hub in the bottom left.
The picture below shows what your case could look like with iCUE Link at work - sure, it probably wonât be quite as neat and tidy as this, but even my own current gaming PC (which is somewhere in the triple digits of âcomputers Iâve builtâ) doesnât look this good behind the side panel.
[IMG alt=âThe backplate of a PC showing neat cable management with the Corsair iCUE Link hub.â]https://cdn.mos.cms.futurecdn.net/zQ...XcwuWpemFR.png
Look at how clean that cable management is. This is bordering on pornographic for PC-builders like me. (Image credit: Corsair)
Building your own PC is still a serious undertaking - and if you prefer the easy life, all the best computers are âno assembly requiredâ - but Corsair claims that using Link products can speed up the overall process by as much as 50%. Iâm not entirely sure where that figure comes from, but I can attest that cable management can be a time-consuming aspect of putting together a high-performance PC. The only downside, of course, is that youâll need to stick with compatible Corsair components to get the best experience - and while Corsairâs products are typically very high quality, there are cheaper options out there.
Corsair offers the full details in a blog post, confirming that the first wave of Link-compatible products will be landing very soon in June, with more products coming later in 2023. Personally, I think this is a great step forward in simplifying the PC-building process; I just wish Corsair made more stuff, so this wouldnât be limited to just cooling components. Corsair graphics cards, please?
Continue readingâŚ