• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Solved USB hard drvie not showing up

Status
Not open for further replies.
Hello. I have a Seagate expansion SCSI Disk that wont show up to access.
It is visible for a short time in Device Manager then drops out. see pics
Any help would be great. Thanks in advance.
Cheers
Gibbsy
 

Attachments

  • devicemng 1.jpg
    devicemng 1.jpg
    20.1 KB · Views: 10
  • devicemng 2.jpg
    devicemng 2.jpg
    22.8 KB · Views: 12
and something else to try.
it may be the external caddy itself.
try putting the drive directly into the PC.

and a cautionary note on external drives. (not saying this applies to you - just a heads up to all out there :) )
all drives hate vibrations, but generally the surrounding cases of laptops and desktops offer a bit of a buffer zone.
not so with external enclosures.
my analogy is, if the force is enough to crack an egg, it'll be enough to destroy data or the drive itself.
so don't keep them within arms reach when they are in use and if you have to move them, disconnect first, then move. (or be bloody careful)
when they are off (disconnected) they are almost indestructible.
 
Only yesterday, I had an SSD in an external enclosure, and would not show up in Disk Management,Device Manager.
Switched from USB3 to USB2 rebooted, and showed up in Disk Management, and Device Manager.
The USB3 ports are working as I use it for my Flash drives, webcam etc,
The external drive just would not be recognized in the USB3 ports.
How weird is that?
 
Only yesterday, I had an SSD in an external enclosure, and would not show up in Disk Management,Device Manager.
Switched from USB3 to USB2 rebooted, and showed up in Disk Management, and Device Manager.
The USB3 ports are working as I use it for my Flash drives, webcam etc,
The external drive just would not be recognized in the USB3 ports.
How weird is that?
How do I switch from USB3 to USB2 rebooted etc mate
 
as Dougie said, USB2 ports usually have a black bit of plastic inside that forces you to orientate the USB plug only one way.
USB3 are usually blue.

but in both cases - not always.

if it also fails on other PC's, it's looking more like a caddy or drive itself issue.
 
as Dougie said, USB2 ports usually have a black bit of plastic inside that forces you to orientate the USB plug only one way.
USB3 are usually blue.

but in both cases - not always.

if it also fails on other PC's, it's looking more like a caddy or drive itself issue.

Would putting the HDD in to the second internal slot help, or just the same result?
 
that would definitely help, and in fact is the next logic thing to try, if for no other reason then to prove it is the drive and not the enclosure.
if drive is detected, sweet - it's the caddy.
if drive still not accessible, 'pile of poo emoji' - you're in a world of hurt.
 
Sadly no joy, I am just going to have to back up what I have and consider it a lesson learnt.
Thanks for all you help. Cheers - Gibbsy
P.S. How do I close this post?
 
Sorry that we were not able to help on this occasion but thank you for letting us know that you no longer required assistance (y)

I am just going to have to back up what I have and consider it a lesson learnt.
We are all still learning and rest assured there will be many folk that read your thread and then hurry off to back up their data.

On behalf of our colleagues who helped with your thread you are welcome :)
 
Status
Not open for further replies.