Speccy is telling us that dodgy video drivers were installed first followed by Razer keyboard and mouse drivers next, we are not in a position to argue with yourself or Speccy but what can`t speak can`t lie and Speccy says the drivers were incorrectly installed,
Leaving the drivers, below is how you need to test your RAM and memory slots properly;
How to physically test your RAM.
The following checks require the computer case to be opened so take the following safety precautions 1st, disconnect the power cord from the wall socket, press the case power button for twenty seconds or so to get rid of any residual charge in the system, take anti static precautions before touching anything inside, you can do this by touching a bare metal part of the case or PSU or if a notebook by touching a household radiator or associated copper feed pipe.
Have a pencil and notepad to hand.
Remove each stick of RAM and blow out the memory slots.
Insert the first stick of RAM in memory slot A2 which is the second slot away from the CPU, reconnect the power and in the case of a desktop computer the video to screen cable and the keyboard.
Power up the computer and see how it goes.
Make a note of the results.
Repeat the procedure until the first stick of RAM has been tested in each memory slot and the results written down.
Remove the first stick of RAM and put it to one side on top of a piece of paper with the number one on it for identification purposes.
Repeat the procedure with all RAM until each stick has been tested in all slots, the results written down and the sticks identified numerically.
Now the really long winded part;
If no individual stick of memory or slot on the MB has an obvious problem all of the above needs to be repeated but this time by running
Memtest 86 for each stick of RAM and in each slot on the MB and for at least 4/5 passes, for some reason that many of us cannot explain a stick of RAM may work in one slot on a MB but not in another.
