• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Solved Random Shutdowns

Status
Not open for further replies.
See if this helps
https://hardforum.com/threads/white-stuff-in-brand-new-corsair-psu-urgent.1598243/

It's some sort of glue to stop the coils from high frequency vibration aka coil noise.

Yeah it seems to be in order then, the other PSU's I've had arent generally as "open to view" as this one, and with a white wire stopping where the white glue begins, it looks like its melted lol, my apologies.

Though the PSU has low voltage, why would that suddenly just happen
 
I have had PSU's dead out of the box, last 6mths up to 6 years.
No guarantee how long a Psu will last.
You don't need to install to test another PSU.
Just leave loose and plug in the connections, it is only a test.

I have 3 Maelstrom 120 K's running on $ 3,000 gaming machines.
Getting 27 29 and 30 on idle.
My guess it is not installed onto the CPU correctly with the correct brackets facing the correct way.
 
Last edited:
Just to clarify,the melted end of the wire is the psu in question correct?

Yes, the PSU with the white glue is the PSU in the computer at the moment. I have had a little look online, and it's true that this white "glue" is actually meant to be there. Though I still have a feeling the PSU could be at fault here.As you stated, the volt readings are a little low, and when compared to my previous readings after the PC was built, they do differ. The link below is the readings I had previously.

https://pchelpforum.net/t/im-not-liking-those-heat-readings.18718/#post-32627



I have had PSU's dead out of the box, last 6mths up to 6 years.
No guarantee how long a Psu will last.
You don't need to install to test another PSU.
Just leave loose and plug in the connections, it is only a test.

I'll try this, in fact I'll do so once I've completed my morning "ritual" of waking up. It's an early day for me, it's currently 4.14am, I've woke up because the thought of losing money not having a PC is killing me. So I've decided to have yet another look and try yet more things, I'm going to be switching out many parts today to try and solve this problem.

I have 3 Maelstrom 120 K's running on $ 3,000 gaming machines.
Getting 27 29 and 30 on idle.
My guess it is not installed onto the CPU correctly with the correct brackets facing the correct way.

All is correctly installed. When installing anything on a computer, whether I've done it before or not, I'll always follow the instructions to the latter, and watch some videos on YouTube as well. Except one time I put a PSU in my computer upside down, I always do things correctly.

The Cooler is on evenly, I tighten up the screws half a notch at a time, so that the cooler connects with the CPU evenly. The bracket is the AM3+ bracket, which is the only one which will fit onto my board, as well as the brackets housing the cooler. I honestly don't think the installation of the part is at fault here, especially seems as I reapplied thermal compound and re-seated the cooler yielding no results.

Also because it's the CPU heating up so intensely, I'll be switching that out after I've tried the PSU, I'll re-post when I've tested the PSU and CPU.
 
I'll be switching that out after I've tried the PSU, I'll re-post when I've tested the PSU and CPU.

You have received some pretty solid advice and it's great you are going to try another PSU. and yes the white "Goop" you saw is a very common silicon type glue used extensively in the electronics industry. The purpose of it is to mechanically support components so during transport or movement the components are not able to move solely on their electrical contacts.

Please let us know when you have tried another PSU. BTW you say in post three you have the CPU and radiator fans hooked up opposite to what they should be. This should be rectified also. Do not be concerned about 3 and 4 pins as they should only fit the connector in one manner.
 
You have received some pretty solid advice and it's great you are going to try another PSU. and yes the white "Goop" you saw is a very common silicon type glue used extensively in the electronics industry. The purpose of it is to mechanically support components so during transport or movement the components are not able to move solely on their electrical contacts.

That's why I come here, the advice is always bang on, everyone knows what they're on about, I'll always come here first for any PC needs, far better then any PC shop (as long as your willing to put in a little effort that is). Aye I Read up on the "gloop" and I'll admit I felt pretty silly for not knowing, but in my books I've learnt something new regarding this.

Please let us know when you have tried another PSU. BTW you say in post three you have the CPU and radiator fans hooked up opposite to what they should be. This should be rectified also. Do not be concerned about 3 and 4 pins as they should only fit the connector in one manner.

I tried the other PSU, and it did exactly the same thing. It overheated whilst in desktop, this time I wasn't even able to get HWMonitor up to check any temperatures. Though that post was a few months ago, and even now the instructions show the fan being installed the other way around. I'm not sure why.

Yeah, I rectified the fan as soon as I posted that pretty much, it worked and helped decrease my temperatures.

Though, whilst I was performing surgery, I switch my cooler round just to try and eliminate any more suspects. I've put in an old CPU cooler I got with my FX-4100, it's old but it was for testing purposes only. I hit the nail on the head. The temperatures have dropped, in fact I'm writing this post on my computer now, and I'm getting cold with the cold air it's pumping out in my direction.

I'm guessing that the pump in the liquid cooler had packed in, it's brand new so I'm not sure why it would just suddenly "break", I might have just got a bad product, as Dougie highly recommends this product, and so do I, when it was working it did a perfect job. I'm attaching some screenshots. It's been running for about 10-30 minutes, by now it normally has shut down, but my temps are steady and holding.


The only question I have now is WHY it stopped, and will Deepcool send me a fresh item? I mean I do believe failures like this will be covered by warranty right?
 

Attachments

  • HWMonitor 1.png
    HWMonitor 1.png
    25 KB · Views: 12
  • HWMonitor 2.png
    HWMonitor 2.png
    32.5 KB · Views: 11
Last edited:
The only question I have now is WHY it stopped, and will Deepcool send me a fresh item? I mean I do believe failures like this will be covered by warranty right?

Hello Allan.T
Perhaps you could have run the system for a time with just the fans connected correctly before changing the cooler? To change more than one thing at a time makes it difficult to determine the issue.

Your question above is pretty well impossible to answer accurately from the information in this thread, possible causes are..
  • Indeed the cooler could be faulty.
  • The backward connection of CPU and case fan connections.
  • Faulty cooler installation, including thermal paste.
  • Faulty motherboard.
  • Faulty PSU.
Indeed if the cooler is faulty Deepcool should replace it for you. They will know what caused this if they indeed were to check the cooler, it may be easier and quicker for them to replace it?

BTW I now have two of these coolers and they are great efficient, absolutely silent coolers.
 
Hello Allan.T
Perhaps you could have run the system for a time with just the fans connected correctly before changing the cooler? To change more than one thing at a time makes it difficult to determine the issue.

Ah, you mean how the liquid cooler was installed when I ran into the issues? or do you mean the other fans on my computer? I was actually told on this forum that I should switch the liquid coolers fan around to change the direction of the air flow. I originally had it with the emblem showing itself, but I was told to swap it around as that was the best way for the cooler to operate. See the thread I linked for more details. I did package the cooler back up again, I honestly do believe the pump has gone given the swift rate at which the computer overheated.

I didn't change everything all at once, I only do one item at a time. I first tried a different PSU, when that didn't work, I connected the original PSU back up and then change the CPU cooler. Which instantly provided a result.

Your question above is pretty well impossible to answer accurately from the information in this thread, possible causes are..
  • Indeed the cooler could be faulty.
  • The backward connection of CPU and case fan connections.
  • Faulty cooler installation, including thermal paste.
  • Faulty motherboard.
  • Faulty PSU.

Well I have this weird little do-dad for applying paste. It's like a template, I place it over the CPU, apply the paste, and even it out with a tool they supplied. Though I'll admit, when I re-seated the liquid cooler, I didn't use it, I used the 5 point rule instead. I used the same method when applying this cooler that is currently installed now.

I mean, if I made a mistake, I'll hold my hands up. But I installed the cooler exactly how it told me too, I even moved around some fans so I could do so (and with this case, thats alot harder then it sounds). I could be at fault, I might be at fault, but I've only followed the instructions unless I was told otherwise by people on this very forum.

The backward connection of CPU and case fan connections.

? Did I install it wrong ?

Indeed if the cooler is faulty Deepcool should replace it for you. They will know what caused this if they indeed were to check the cooler, it may be easier and quicker for them to replace it?

Tbh, I'm hoping they replace it, I loved this cooler, and having that fan in there is quite noisy compared to what I'm used to, it also does a much better job. I do miss it, I feel like my computer has just lost a leg.

BTW I now have two of these coolers and they are great efficient, absolutely silent coolers.

I miss it already, I was shocked at how well it performed especially for the price. I honestly cannot fault how the product performed, it was excellent.
 
Of course Deepcool will replace the cooler, as it is still under Warranty.
Every product has failures, and you were just unlucky.:cry:
As far as the PSU don't buy cheapies, as they normally don't last long.
Adding to that the cheapie PSU's normally have shorter wiring, and often you need to buy cable extensions to reach.
An 80+ Certified I recommend. You are guaranteed wattage delivery.
You are down in your 12v Rail readings so a new PSU is needed.
PSU is one of the most important pieces of Hardware in your computer.
 
Of course Deepcool will replace the cooler, as it is still under Warranty.
Every product has failures, and you were just unlucky.:cry:

Indeed I was, it seems that the maelstrom is getting more and more popular. I did honestly love it whilst I had it. I miss the little pulsing face, and the extra fan lol. Though I've sent DEEPCOOL an email with proof of purchase etc, I'm just waiting for a reply.

As far as the PSU don't buy cheapies, as they normally don't last long.
Adding to that the cheapie PSU's normally have shorter wiring, and often you need to buy cable extensions to reach.
An 80+ Certified I recommend. You are guaranteed wattage delivery.
You are down in your 12v Rail readings so a new PSU is needed.
PSU is one of the most important pieces of Hardware in your computer.

Yeah that's the main regret of this build, I should have put alot more cash into the PSU. I am in the middle of planning anew build though, I'm not sure if I should change the PSU now, or just huff it out until I'm on my new box. THEN replace it, as this build will be going to my partner, so she can do music editing.

I know I wont be gaming for a while without my cooler. The fan is doing a pretty poor job, it keeps it cool but if I click on a game, it gets really unhappy.
 
If this build is going to your partner, then replace the PSU now for her, as this present PSU is starting to fail, going by the rail readings.
Regardless of what your partner intends to do with this computer.
I will say it again. The Maelstrom 120K is an amazing cooler.:thumbsup:
 
If this build is going to your partner, then replace the PSU now for her, as this present PSU is starting to fail, going by the rail readings.
Regardless of what your partner intends to do with this computer.
I will say it again. The Maelstrom 120K is an amazing cooler.:thumbsup:

Ah, I'm not all that clued up on when things are going kaput, but I'll look into getting a new PSU, though, judging from my past choices I think I may need a little help.
 
Every one will recommend a different Brand. Best you read reviews of different brands, on the Net.
I need to get some of my own work done.Back later.:)

oki koki Thank you for the advice. I should deem this thread as solved until I get a replacement liquid cooler.

Thank you to everyone, you've all been excellent with amazing advice :) Kudos to all of you
 
Status
Not open for further replies.