Since my current system has 4Gb of RAM (single card DDR3 1333Mhz) and according to the leaflet the system has the capability of up to 8Gb of memory, I bought a 2nd memory card, exactly the same with the current memory card.
I disconnected all the cables from the tower, pressed the power button for a several seconds to remove static electricity (even had reset the CMOS) I plugged the additional memory card onto the remaining slot.
When I powered on the pc, I've heard some beeps with the following sequence * *** *** ***. The beeping stopped, the fans were turning at full spin and the monitor remained at a sleep state.
I tried to put the new card only in both slots at a time but the same happened as above.
Then I borrowed a DDR3 1066 2Gb from a friend, powered on, the same story but without any beeps.
I really need to upgrade my current system cos Windows 10 seem way heavier that 7 so I need those extra Gb of memory.
Heres my system : CPU : Intel Pentium E5500, Dual Core 2.8Ghz
MAINBOARD: Fujitsu D3041-A1
BIOS : Phoenix Technologies 6.00R1.02.3041.A1 (latest version)
CL:6, TRCD:6, TRP:15 TRFC:64 (clocks)
Current Memory Card: 4Gb PC3-10700H Corsair
GRAPHICS: NVidia GeFORCE GT 710 2Gb
Note that theres no clocking settings in BIOS or other memory related options.
I disconnected all the cables from the tower, pressed the power button for a several seconds to remove static electricity (even had reset the CMOS) I plugged the additional memory card onto the remaining slot.
When I powered on the pc, I've heard some beeps with the following sequence * *** *** ***. The beeping stopped, the fans were turning at full spin and the monitor remained at a sleep state.
I tried to put the new card only in both slots at a time but the same happened as above.
Then I borrowed a DDR3 1066 2Gb from a friend, powered on, the same story but without any beeps.
I really need to upgrade my current system cos Windows 10 seem way heavier that 7 so I need those extra Gb of memory.
Heres my system : CPU : Intel Pentium E5500, Dual Core 2.8Ghz
MAINBOARD: Fujitsu D3041-A1
BIOS : Phoenix Technologies 6.00R1.02.3041.A1 (latest version)
CL:6, TRCD:6, TRP:15 TRFC:64 (clocks)
Current Memory Card: 4Gb PC3-10700H Corsair
GRAPHICS: NVidia GeFORCE GT 710 2Gb
Note that theres no clocking settings in BIOS or other memory related options.