• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Solved PC stays powered on after wondows shut down!?

Status
Not open for further replies.
Hi, have just looked into this and have disconnected the power switch completely and still boots up straight away. Shorting out the pins does power up the windows side of it. But PC still comes on straight away with the pwr switch connector on pins 6 and 8 removed completely from the MB.

:(
 
100% rules out a software issue.

Remove the GPU from the PCI-E slot on the MB, reconnect the power cord, flick the switch on the wall socket to see if the PSU and internal cooling fan/s etc spin up without you having pressed the case power button or shorting the pins, we are not expecting the PC to display anything just seeing if the GPU is involved in the behaviour, if still the same, repeat the process but trying only one stick of RAM at a time.

Just a fyi, powering up and booting up are two different things, a PC has not booted until you are in Windows whereas what you described is happening with your PC is that something is powering up some but not all of the hardware.
 
No problem, life must go on.

A power good signal problem is a strong possibility now, could be on the PSU or the MBs side and being that the PSU is of poor quality and needs replacing in any event that is what I suggest is replaced.

Is the GPU an Nvidea one or a third party such as ASUS, Gigabyte or MSI etc.
 
Status
Not open for further replies.