• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Solved PC bsod nonstop as soon as windows loads in

Status
Not open for further replies.

Maurice

PCHF Member
Feb 1, 2021
37
0
27
I was watching YouTube and then out of a sudden I got a bsod, I started the pc and and then it went downhill
Whenever the windows spinning thing appears the pc gets bsod and each time a different error:
PAGE_FAULT_IN_NONPAGED_AREA

SYSTEM THREAD EXPECTATION NOT HANDELED

DRICER_IRQL_NOT_LESS_OR_EQUAL
 
Post a new Speccy url and upload any crash dmps which you need to do by only using the following steps;

1. Copy any dmp files from C:\Windows\Minidump onto the desktop.
2. Select all of them, right-click on one, and click on Send To> New Compressed (zipped) Folder.
3. Upload the zip folder using the Attach button, bottom left of the dialogue input box
 
Speccy is not flagging anything up which is normally a good sign as it suggests that your hardware is ok,

One thing missing from Speccy is the RAM voltage so if the computer happens to restart at all can you go into the BIOS and see what voltage is reported for the DRAM.

We need to wait on any dmps and the RAM voltage info for now.
 
Aight so, I can't figure out how to find the ram voltage in bios
And for the dmps, I can't get those either since trying to boot into my SSD sends me directly to the bios
 
Go into the AI Tweaker area of the BIOS then scroll down until you see DRAM voltage, is there an Auto tab to the right of it.

So you haven't been able to boot into Windows at all since you post your reply #3 yesterday.
 
Yup there is an Auto tab to the right of the DRAM Voltage and on top right it says standard =1.500V
And about my windows, I had to reinstall Windows to get it to boot up again
 
Aight so, I can't figure out how to find the ram voltage in bios
And for the dmps, I can't get those either since trying to boot into my SSD sends me directly to the bios

Was just acknowledging what you had post in your reply #5., if you would rather that I just ignored the info you may want to not type in bold next time :whistle:
 
Can I just double check that since you reinstalled Windows you then did the following;

1: Installed the chipset drivers for the MB.

2: Installed the SATA drivers for the storage devices.

3: Installed the appropriate drivers for your video card.

You are welcome :)
 
Glad to hear it and lets hope that you will not have any more issues.

Tip, before installing any new software/programs etc, make sure that you create a new system restore first and as long as everything is running smoothly do not update any drivers.
 
Not heard back from you Maurice , do you still require assistance or is the issue now resolved, an update would be appreciated.

Edit to add: We will take the lack of a response as the issue being solved and mark the thread accordingly.
 
Status
Not open for further replies.