• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Lubuntu Will Not Boot

Status
Not open for further replies.
Greetings I am running Lubuntu on an older laptop and everything was working perfect. I shut-down the PC last night and went to turn it on today, and am only getting a black screen. Just hangs on the black screen. If possible, I would like to avoid a complete re-install, but if that's my only option I can do such.

I am currently botting Lubuntu from a flash drive on said PC and everything seems to be working A-OK. I have checked the obvious, i.e. boot order and it is set to boot USB 1st then Hard Drive 2nd. What other steps should I take to get this sytem booting?

EDIT ->
Upon my further researching it seems that maybe the laptop can no longer "see" the hard drive. Is that what the fdisk output below is showing?
Code:
lubuntu@lubuntu:~$ sudo fdisk -l
Disk /dev/loop0: 1.5 GiB, 1630965760 bytes, 3185480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




Disk /dev/sda: 3.7 GiB, 3965190144 bytes, 7744512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3d998521

Device     Boot Start     End Sectors  Size Id Type
/dev/sda1  *     2048 7744511 7742464  3.7G  c W95 FAT32 (LBA)


Disk /dev/zram0: 844.9 MiB, 885915648 bytes, 216288 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 844.9 MiB, 885915648 bytes, 216288 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
 
@jmarket -> The drive was working fine, I shut down for the night and turned it back on and get the message. I have used a USB to SATA adapter and connected to the drive to a windows machine (which I understand better, lol) - and when I plug it in and go to computer management I see this

However, the drive is not auto-assigned a drive letter. Maybe somehow the MBR is corrupted/lost?? (shooting in the dark here) - is there a way to get this drive operational w/o loosing data?
 

Attachments

  • Capture.PNG
    Capture.PNG
    6.7 KB · Views: 8
@jmarket - no worries. Hope you have a wonderful Thanksgiving. If I understand the second link properly, if my drive is mounted as sdb to check and repair I would simply run this command, correct?
Code:
fsck -y /dev/sdb
 
Status
Not open for further replies.