• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CPU EZ Debug light

Status
Not open for further replies.
My CPU EZ debug light is coming on and my monitor screen is black it does not show a no signal sign.
my secs;
motherboard: B450 tomahawk max II
CPU: Ryzen 5 5600x
AIO Cooler: NZXT Kraken x53
GPU: GeForce RTX 3050
Ram: Corsair Vengeance Pro
Yes, I have my HDMI plugged in to my graphics card not my motherboard.
 
Did you add the proper amount of thermal paste?

Ram: Corsair Vengeance Pro
Make and model

RAM installed into proper ports.

Go through the system and reseat RAM, Display, power cables, data cables, make sure the fans and cooler are plug into the proper places on the motherboard.

Proper BIOS for the CPU you have?

Contact the motherboard manufacture could be an issue with the motherboard.
 
Idk what the BIOS is I am new to building PCs I believe that everything is plugged in because all my fans are running and all of my rgbs are on. I had pre placed thermal past on my aio cooler
 
BIOS (Basic Input/Output System) is firmware used to provide runtime services for operating systems and programs and to perform hardware initialization during the booting process.

You will have to refer to the manual to confirm that everything is in its proper spots.
 
Do you have anything overclocked and also make sure that the BIOS for the RAM is not set to XMP.

I have 4 16GB sticks
Would make 64 GB (4*16=64)

Corsair Vengeance RGB Pro SL 32GB​

Where is the 32 GB

May need to update the BIOS

 
I would update the bios to start with you need a blank usb
RYZEN 5Vermeer5600X1003.7GHz3MB32MBB065N/A7C02vH4.zip
You plug the usb into the flash bios port and press the button - You do not need the cpu and the ram installed to do this.
When you installed the cpu it should have just fallen in - no pressure needed.
See attached pics.
Is your ram speed 3200MHz?
This from MSI
If you have any question during updating BIOS, please contact MSI Service and Support to avoid any damage resulting from improper use or lack of technical expertise.
 

Attachments

  • Bios Flash 1.JPG
    Bios Flash 1.JPG
    39.8 KB · Views: 4
  • Bios Flash 2.JPG
    Bios Flash 2.JPG
    30 KB · Views: 4
Last edited by a moderator:
Status
Not open for further replies.