• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't get 1 TB (2.5 " drive) to fit into HP Pro Book 6555b laptop.

Status
Not open for further replies.
I have my Win 7 system cloned ( 1 TB cloned drive to replace the 160 GB one ). It fits into the HDD caddy but won't allow it to connect up . The 160 GB appears way thinner (about half the thickness of the new 1 TB one) . Is there a thinner I TB drive (SSD?) that will fit and allow the drive to fit?
 
What is the make and model of the New HDD and the old HDD?

See if this helps

These are the numbers on the HDD.

ST91000640NS = Seagate I TB ( about 1/2 Inch - 12.7 mm )

HTS725016A9A364 = Hitachi 160 GB ( about 1/4 Inch - 6.35 mm )
 
Systems are getting smaller and more compact, and hardware is sometime behind.

2.5-inch drives use to be the standard for laptops.

Have you looked at HP to see if they have drives that fit?

Did a quick search for thin 2.5 drive ssd and found a few yet not sure on the dimensions.

Have you tried looking at some of the local computer shops?
 
Is a 2.5" drive different ( I purchased my two 1TB drives from Amazon ) from a laptop drive or did they started making the specs larger from when the drives were originally made?
the large capacity drives had multiple internal platters when they first came out.
now they do one platter, hence thinner units.

you need to get a 7mm thick drive as that is the size of your current 160GB unit.

personally, I'd be getting a SSD drive as they have always been 7mm thick - but check first!
 
Why not get an SSD would be faster and less chances of failure since there are no moving parts.

None of the drives you have asked about are SSDs
I looked at some SSD's, but they were listed as SATA III.

(I wasn't entirly sure they would work - the online .PDF manual for my laptop HP probook 6555b only listed the HDD as"sata" not "sata III")

Unless they are backward compatible I don't know if they would work or not.

Here is one of the SSD's I looked at for it - https://www.newegg.com/gigastone-960gb-8400/p/0D9-00A3-00005
 
Status
Not open for further replies.