• Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cannot install any x64 OS

Status
Not open for further replies.
Hey guys,

It appears I now cannot install any x64 OS
●Win 10- BSOD straight away showing Kernel Security Check Failure
●Win 7- Restarts after loading files
●Win XP - Restarts after seting up just before format
●Ubuntu- LIVE USB runs fine, trying to install restarts after choose username and password

I've tried 3 seperate hard drives and switching between usb and dvd, I've isolated the ram and removed all but essential.

My system:
Mobo: Intel DQ57TM
CPU: Intel i3 650

I have managed to run a x32 XP and removed an old hdd from a laptop that had x32 win 10 on it that ran.
 
Hello lilpodigepie,

Bit of an odd one and if ok with you lets try and stick with just the one OS, Windows 10, coupe of questions if I may;

From where was the Windows 10 media for the installation obtained, you can check that the ISO is good using QEMU if you have access to another computer

If these components are out of a brand name computer can you post the model name and number for us.
 
Hello lilpodigepie,

Bit of an odd one and if ok with you lets try and stick with just the one OS, Windows 10, coupe of questions if I may;

From where was the Windows 10 media for the installation obtained, you can check that the ISO is good using QEMU if you have access to another computer

If these components are out of a brand name computer can you post the model name and number for us.
I tried the media creator and an ISO from a torrent site (I have paid for licence just to double check that iso wasn't the issue)


I'm sorry I don't quite understand what complete you mean my motherboard is Intel DQ57TM and CPU is Intel i3 650

Thanks for all the help :)
 
We can only help you if you an official ISO that was downloaded direct from Microsoft so please no more mention of torrents.

Was the motherboard out of a brand name computer such as a Dell or HP, reason I ask is because you can sometimes find the proper installation disks for them.

Tbh I have only ever seen this type of problem when someone was trying to install 32-bit Windows on a 64-bit computer, what they hadn't done when downloading the ISO was use the create an ISO for use on another computer option so the ISO that was created was for the 32-bit computer that the person was using at the time.

Starting from scratch, do you have a Windows 10 ISO from Microsoft on a 16GB thumbdrive that was created on a 64-bit computer.

Can I ask that you do not quote every reply, it really does not help any and just makes for unnecessary reading, thanks.
 
I got the mobo from my brother who got it from eBay so unfortunetly no disk.

I do have the win10 x64 iso from windows however I dont have a seperate pc so I need to install xp x32 and create bootable media that way n yeah I've got a 16GB thumbdrive and an external disk drive.

When I created the media I definitely clicked for use on another pc, to make the usb drive

Sorry about the quotes.
 
Did the board work when your brother had it, have to ask as for all we know it may have been on ebay because it was broken.

Am I understanding the above correctly, you have Windows XP running on a computer and you want to clean install Windows 10 on it.
 
Yeah all was working fine when he had it, was carefully looked after and stored in one of those electric proof bags etc.

Yes that's correct so I've currently got x32 Windows XP running and I need x64 7 or above. My prosesser and mobo are defo x64 comparable
 
First thing that was checked was compatibility so we know that the MB and CPU are compatible.

Did you check your Windows 10 ISO with QEMU as was suggested in my reply # 2
 
What are you expecting to happen, reason I ask is because if the ISO is good all you will get to see is the blue Windows 10 logo on the screen, if you don`t it suggests that the ISO is bad.
 
So I've managed to install VMware and ran the iso. I get the following error:
A fault has occurred causing a virtual CPU to enter the shutdown state. If this fault had occurred outside of a virtual machine, it would have caused the physical machine to restart. The shutdown state can be reached by incorrectly configuring the virtual machine, a bug in the guest operating system, or a problem in VMware Workstation.

Just before the above error appears I see the usual windows 10 logo with no rings the it hangs for lets say 5 minutes, this is excatly what I also see when I try boot the x64 from my own physical system. except it restarts or goes to BSOD sometimes showing error Kernel Security Check Failure

I've also tried another x64 ISO on WM and it does the same, I also tried a x32 bit OS and that installed just fine. I'm going to retry the download from the media creator and try again. I'll update how this goes!
 
Excuse me butting in here but I see you mention a virtual machine in some of your posts. Is your issue the fact that you cant run 64 bit bit operating systems inside a virtual machine? If so you will have to enable Virtualization in your bios to run 64 bit guest OS's
 
In addition to what gus has advised;

Just before the above error appears I see the usual windows 10 logo with no rings
If you are talking about when testing your ISO with QEMU then that is exactly what you should see, the check only goes as far as the Windows logo so no rings, the fact that you get the Windows logo means that the ISO is good, over to what gus has spotted now.
 
Thanks very much for the info Gus, the iso does now boot within VM.

And on any iso I try I do see the blue logo, So im guessing the ISO is not the issue, which in a way to me is bad news as it's harder fix!

I downloaded the ISO files from the Microsoft site again this time without the media creator, I used poweriso to write to USB, now both the x64 and x32 restarted after hanging on the blue logo for a few moments. The x64 one did show rings for a few seconds before restart.
 
You mentioned Linux in your OP, have you tried mounting the drive in Linux and then checking the disk.

What about trying connecting the HDD to other SATA ports.
 
I could acsess Linux using a live usb however that only worked for maybe 1 hour, restarted then wouldn't open again no fault was just freezing on the Ubuntu logo.

I could reinstall and try it again but I'm not quite sure how to check a disk I'm a very novice Linux user.

I've just tried moving the sata port and I have a new bsod, PFN_LIST_CORRUPT
 
The error you got could be the HDD itself being bad as the other common cause is driver related which would be difficult without Windows being installed.

Puppy Linux tutorial for you below, calling it a day now but will check back tomorrow.


===================

***Required Hardware***

CD Burner (CDRW) Drive,

Blank CD,

Extra Storage Device (USB Flash Drive, External Hard Drive)


===================



1. Save these files to your Desktop/Burn Your Live CD:
  • Download Latest Puppy Linux ISO (i.e.: lupu-528.iso)

    Download BurnCDCC ISO Burning Software



    There are instructions on how to boot from flash drive with puppy here; http://www.pendrivelinux.com/put-lucid-puppy-on-usb-flash-drive-from-windows/


    • Open BurnCDCC with Windows Explorer
    • Extract All files to a location you can remember
    • Double Click
      1 BurnCDCC Icon.PNG
      BurnCDCC
    • Click Browse
      2 BurnCDCC Browse Button.PNG
      and navigate to the Puppy Linux ISO file you just downloaded
    • Open/Double Click that file

      IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x
    • Click Start
      3 BurnCDCC Start Button.PNG

    • Your CD Burner Tray will open automatically
    • Insert a blank CD and close the tray
    • Click OK
    Puppy Linux Live CD will now be created

2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second

    • Start the computer/press the power button
    • Immediately start tapping the appropriate key to enter the BIOS, aka "Setup"

      (Usually shown during the "Dell" screen, or "Gateway" Screen)
    • Once in the BIOS, under Advanced BIOS Options change boot priority to:

      CD-ROM 1st, Hard Drive 2nd
    • Open your ROM drive and insert the disk
    • Press F10 to save and exit
    • Agree with "Y" to continue
    • Your computer will restart and boot from the Puppy Linux Live CD



      4 BIOSBootPriorityImage.png




3. Recover Your Data

  • Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM). You will see a fully functioning Graphical User Interface similar to what you normally call "your computer". Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning. Also, double clicking is not needed in Puppy. To expand, or open folders/icons, just click once. Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to. This is normal. Ready? Let's get started.



    3a. Mount Drives
    • Click the Mount Icon located at the top left of your desktop.
      5 Puppy Linux Mount Icon.PNG

    • A Window will open. By default, the "drive" tab will be forward/highlighted. Click on Mount for your hard drive.
    • Assuming you only have one hard drive and/or partition, there may be only one selection to mount.
    • USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted.
    • If using an external hard drive for the data recovery, do this under the "drive" tab. Mount it now.

    3b. Transfer Files.
    • At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon.
    • Open your old hard drive i.e. sda1
    • Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1
    • If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows)
    • From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window.

    For The Novice: The common path to your pictures, music, video, and documents folders for XP is: Documents and Settings >> All Users (or each individual name of each user, for Vista and above C:\Users\$USERNAME\[...]. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos.



    Remember to only click once! No double clicking! Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy. Choose COPY each time you drag and drop.



    YOU ARE DONE!!! Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer. Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations!







    PuppyLinux528screenshot.png

 
Status
Not open for further replies.